Advanced Manufacturing Research and Collaboration Cluster - Rapid Prototyping

Rapid Prototyping

AMRCC member practitioner of this technology

Rapid Prototyping Concepts


Rapid Tooling Concepts

WHAT IS RAPID PROTOTYPING?

Rapid Prototyping (RP) is the automated fabrication technologies of seamlessly and rapidly creating accurate representative physical models of mechanical parts directly from 3-dimensional Computer Aided Design (CAD) data without the use of tooling and with minimal human intervention. Developed in the mid-'80s, RP uses state-of-the-art laser technology, positioning systems, materials and computer technologies in the various processes. There are many RP processes that are widely used, each one using different methods and materials to produce the final part.

This report will briefly describe these RP processes along with others of interest, materials, uses and services available. As always, if additional information is needed, please contact the AMRCC.

<< Return to Top

BENEFITS

Some of the many potential benefits of Rapid Prototyping include:

  • Reduces design phase cycle time and costs
  • Reduces the potential for expensive design errors
  • Reduces tooling costs on short-run parts
  • Impresses the customer with quick response
  • Reduces time to production and market

<< Return to Top

COMMON SYSTEM PROCESSES

The process common among all modeling systems begins with the creation of a CAD solid model of the part to be prototyped. Virtually any shape that can be made by the CAD software can be prototyped with no size limitations on the part. Multiple part assemblies may be prototyped, including moving parts and parts within parts. An industry standard, STL file of the part is created and then sent electronically to a service provider to generate the prototype part. The .STL file defines the part as a grouping of triangular facets, which describe the surfaces of the part. If the CAD software does not support .STL files, other file types such as IGES and STEP are usable but may be subject to software compatibility between the customer and service provider.

The service provider reviews the CAD part for various design criteria, designs support structures if needed and then sends it to the modeling system. Support structures to hold the part in place while building, are not necessary for some systems while other systems software automatically design their own. The part Designer does not need to be concerned with these support structures. The modeling system software then automatically slices the CAD part into layers (stacked in the Z dimension) .001 to .020 inch thick, dependent upon the parts geometry and the RP systems capabilities. This slicing is done on the fly as the model part is created. A Laser or machine head traces the profile of the part in the X and Y directions on a build platform forming the first layer. The build platform lowers in the Z direction one layer thickness and the next part layer is traced, including any necessary support structure. Layers are added successively to create the part from the bottom up.

After the part is removed from the modeling system, the support structure is removed and the part is cleaned and a finish applied if needed. It is then sent on to the customer for various uses or to the toolmaker for fabricating molds. It is important to note that until the model is removed from the modeling system, it has existed as only electronic data. Generation of the .STL file and sending the data to the service provider takes only a few minutes of time. There is no need to make time consuming dimensioned drawings or sketches, as all part data is transferred electronically.

<< Return to Top

PROCESS EFFICIENCY

Preparation, .STL file creation and sending of the file to the service provider takes a very short time. Most service providers will be able to return completed parts in typically three to five days after the receipt of valid files plus shipping time of approximately one day. There are too many variables to predict actual RP system run time but all systems run 24 hours a day, unattended. Unfortunately, a service provider's workload will delay delivery but they make a very good effort to meet deadlines. Additional part finishing and molding or casting will also add time to the schedule, but a 10 to 14 day turnaround is possible for small quantities.

<< Return to Top

STEREOLITHOGRAPHY (SLA)

3D Systems manufactures the Stereolithography Apparatus (SLA) which uses the process commonly known as Stereolithography. First to market a commercial Rapid Prototyping system in 1988, they have the most systems in operation and therefore have the most experience. The name "Stereolithography" is occasionally misused to refer to the entire Rapid Prototyping process (similar to the misuse of "Xerox" and "Coke").

3D Systems process uses a laser-generated beam of ultraviolet radiation focused onto the surface of a bath of photosensitive resin. The laser traces the profile of the slice onto the liquid resin and then fills in the solid areas using an open crosshatching pattern. This solidifies the resin into a mostly solid layer of the part profile, which is then lowered into the bath to expose material for the next layer. The process is repeated for each slice until the 3-dimensional object is completely built. The part is then post-cured in an UV oven to solidify the material not solidified by the crosshatching pattern.

Many formulations of acrylic resin are available to match various applications and needs. The parts produced can be machined and finished but are not strong enough to replace production plastic parts. Part detail and quality are excellent, especially the ability to model small details. The ability to hold tolerances across the entire part is in the range of +/-.003. Slice thickness may be as thin as .001 inch. These parts may also be used as masters to produce various types of secondary molds and dies (see the "Rapid Tooling" section). 3D Systems is also the manufacturer of a 3-D printing system (see the following section on "3-D Printers").

<< Return to Top

SELECTIVE LASER SINTERING (SLS)

3D Systems also manufactures the Selective Laser Sintering (SLS) system (formerly manufactured by DTM Corporation, which has merged with 3D System). This process is also well established with many machines in operation. The process is very similar in operation to Stereolithography but differs in that the material used is in powered form.

The SLS process uses a thin layer of heat-fusible powdered material deposited onto a movable build platform, which is then sintered by exposure to a laser beam. The laser traces the profile of the slice onto the powdered material and then fills in the solid areas using a crosshatching pattern. This heats the material to just above its melting point which solidifies after the laser beam has passed. The part is then lowered into the chamber and covered with fresh material to allow for the next layer to be added. The process is repeated for each slice until the 3-dimensional object is completely built. Because the materials used are in a solid form, supports for the model are not required.

Materials include: "DuraForm" Polyamide and "DuraForm GF" for producing parts; "Polycarbonate" and "CastForm" for investment casting patterns; "SandForm Si" and "SandForm ZR" for sandcasting molds and cores; "Copper Polyamide" for short-run tooling and parts; "LaserForm" for injection molding tooling inserts and parts; and "DSM Somos" for flexible/soft parts. Where applicable, the parts produced are quite strong and may be used in pre-production marketing units. Part detail and quality are very good, but fine details and sharp edges loose some definition. The ability to hold tolerances across the entire part is in the range of +/-.005. The parts produced are somewhat porous and require a small amount of work to apply a smooth painted finish, although a dipped coating of resin or "superglue" helps to fill the voids.

<< Return to Top

FUSED DEPOSITION MODELING (FDM)

Stratasys, Inc. manufactures the Fused Deposition Modeling (FDM) systems. This process is rather simple in concept and does not cure its material with a light source. The systems offered are the first truly office environment and desktop machines available.

The Stratasys FDM system uses a reel or cassette of plastic filament that is fed into a heated extruding head, melting it to a temperature just above its solidification state prior to deposition. Within a heated build chamber, the machine head fills in the 2-dimensional profile of each slice in the X and Y directions on a movable build platform to form each layer. The material solidifies as it is placed, creating a laminate of each slice, but is kept at an optimal temperature within the build chamber to allow for fusing with the next layer. A second material, which forms the support structure for overhanging features, is also traced onto the same layer if needed. The part is then lowered by the platform to allow for the next layer to be added; repeating the process for each slice until the 3-dimensional object is completely built.

Materials include ABS and medical grade ABSi; Elastomer E20 for flexible parts; and investment casting wax. Parts produced can be machined and finished and the ABS materials are quite strong and may be used in pre-production marketing units. Part detail and quality are very good, but fine details and sharp edges loose some definition. The ability to hold tolerances across the entire part is in the range of +/-.005.

<< Return to Top

DIRECT SHELL PRODUCTION CASTING (DSPC)

Soligen manufactures the Direct Shell Production Casting System (DSPC). This system directly fabricates the ceramic molds (negative) for investment casting of metals, bypassing the steps of creating the cores used to fabricate the ceramic mold (see the "Rapid Tooling" section). This system jets a resinous binder onto sequential layers of ceramic powder, in a process somewhat similar to the SLS process, until the 3-dimensional object is completely built. The unbound powder is removed and the resulting mold is fired. A new shell is required for each metal part that is cast.

This mold is a direct replacement for those made by the traditional methods and the investment casting process continues unchanged. The cast parts themselves have a slightly rougher surface finish overall and tolerances across the entire part are also slightly more. This process is an excellent choice to use for obtaining castings for prototype testing, marketing samples or small quantity production runs. Cost for small quantity runs is competitive with traditional methods but delivery of parts is substantially faster.

<< Return to Top

3-D PRINTERS

Another sector of Rapid Prototyping is 3-D Printer technologies, which address the need for low cost, easy to use conceptual modelers located in an office environment. The 3-D Printers quickly produce smaller, detailed parts that are mainly used for visualization and concept verification.

Stratasys, Inc. offers the "Prodigy" desktop modeler, which uses an extrusion head to deposit beads of nylon polymer in layers to produce parts. They also offer the "Dimension" 3-D printer that produces parts in ABS. These systems are capable of creating durable parts with good dimensional accuracy, detail and surface finish that may also be used for soft tooling masters.

3D Systems, Inc. produces the "ThermoJet" office modeler which uses a print head of multiple jets to deposit layers of material in a process called "Multi- Jet Modeling" (MJM). This high-speed system produces parts in an organic thermopolymer material with excellent detail that may also be used for investment casting masters.

Z Corporation manufactures the "Z" series of three-dimensional printing systems, based upon technology originally developed by the Massachusetts Institute of Technology. This process uses a print head with 125 jets to selectively spray drops of binder onto successive layers of powder to create "appearance models". This same technology is also licensed to Soligen Technologies to create ceramic investment casting shells. A proprietary water-based solution binder that glues the grains of binder together activates the powdered raw material. The resultant part is porous and not very strong, but can be "quick dipped" into a bath of molten wax or a low-viscosity epoxy to obtain greater durability. The systems main strength is its ability to create parts very quickly in an office atmosphere.

Objet Geometries Ltd. offers the "Quadra" and "QuadraTempo" three-dimensional printing systems which use 1536 nozzles to deposit a proprietary acrylic photopolymer that is cured by UV lights and requires no post-cure or post-processing. The parts support structure is made of the same material as the part, except that the last layer that is attached to the part is a weaker material. This allows the supports to be separated easily from the part without leaving any contact points or blemishes that require post-process finishing. The part strength is excellent for a conceptual modeler as well as accuracy and build speed.

<< Return to Top

DIRECT FABRICATION PROCESSES

A major goal of many Rapid Prototyping researchers is to develop a process that can directly create a metal part without any secondary operations. That goal has been accomplished in theory although there are problems with the parts themselves. These problems include density, weight, warping and not the required material. Two of the manufacturers above offer this technology along with an additional two others that offer only that capability. Many other research organizations and manufacturers are feverishly working on developing direct-to-metal prototyping as well as ceramics and other materials.

3D Systems currently offers a metal process that is produced on its Selective Laser Sintering (SLS) systems. "LaserForm", is an Stainless Steel based metal which is intended to be used to produce injection molding inserts (see the "Rapid Tooling" section) and parts. The SLS part fabrication process is the same as that of its other materials. Once completed, the "LaserForm" part must be cycled through a furnace process to remove the particle binders and infiltrating it with bronze to bring it to full density.

The PROMETAL Rapid Tooling System is a purpose built system that produces only metal molding inserts. The system is a combination of the Selective Laser Sintering (SLS) process with the laser being replaced by an inkjet printer head. The printer head sprays a binder onto a layer of powdered metal. Once completed, the part is cycled through a furnace process to remove the binder and infiltrate it with another, lower melting temperature material. Any metal that is available in powdered form can be used and the system is capable of producing functional parts as well as molding inserts that can be machined and finished.

Laser Engineered Net Shaping (LENS) is a process developed by Sandia National Laboratories, that uses a laser to focus its beam on a substrate which creates a weld pool. Powdered metal is "injected" into this weld pool and is melted. As the laser moves to trace the profile and filled areas of the part, the metal solidifies. This is repeated layer by layer until the part is finished. The metals currently being examined are stainless steel, inconel, H13 tool steel and titanium. Aluminum does not work well with this process. The process is holding tolerances of .005 in the X & Y and .015 in the Z-axis. Two companies. Optomec and Precision Optical Manufacturing (POM) are currently offering systems featuring this technology.

<< Return to Top

OTHER SYSTEMS AND PROCESSES

This article includes only the major systems available in the U.S. market and most of them happen to be produced by U.S. companies. The information provided here is open knowledge that may be obtained through the manufacturer's web site, promotional literature or trade publications. Please see the manufacturer's web site for current product descriptions and other technical information.

There are a number of systems produced or under development in the U.S., Europe and Japan, but they are not marketed in this country. Many of these systems operate very similarly to those included here. When these systems become available, they will be included in this section. Also not included here are a number of systems under development that target larger parts.

<< Return to Top

APPLICATIONS

Rapid Prototyping produces dimensionally accurate and highly detailed parts in durable materials that have many valuable uses to reduce product development time and costs. There are many potential applications for these parts regardless of the material and process that they are made from. The only limitations are in the mindset of the person searching for the application. Some sample applications are as follows:

  • A design verification and optimization tool to qualify the form/fit/function of individual parts and assemblies.
  • Concept visualization tools to verify design details and gain internal design acceptance and justification.
  • A communications tool for internal design reviews, for design reviews with the customer and for dry fit installation checks.
  • A communications tool for production part vendors to examine part details and requirements for bidding and tool optimization.
  • Marketing tools as static or functional demonstration units to test market and customer reaction.
  • A production tool used to examine manufacturing methods of fabricated parts and assembly processes and procedures.
  • As a master pattern for creating "soft tooling" for casting multiple parts in Urethane and other plastic materials.
  • As a master pattern for creating investment casting molds for metal parts, or as the mold itself.
  • As a master pattern to create injection molding dies through various processes to produce parts in the production material.
  • As a tool to assess human factor and ergonomic concerns along with styling attractiveness.
  • As a three-dimensional fixture for bending or routing tubing or cables.
  • As an inspection fixture for parts with complex or compound surfaces and features.
  • As a model to test airflow, ducting, diverters and channels.
  • To create light duty plastic parts for light duty use, such as ducting.
  • As a mold for gaskets, keypads, etc.
  • Most RP parts may be machined, drilled and tapped, sanded, painted, baked, plated, bonded and coated with EMI protection.

<< Return to Top

WHAT IS RAPID TOOLING?

Rapid Tooling is the result of combining Rapid Prototyping (RP) techniques with conventional tooling practices to produce parts of a functional nature from electronic CAD data in less time and at a lower cost relative to traditional machining methods. Rapid Tooling is also known as Secondary Tooling, Bridge Tooling or Soft Tooling consisting of processes that, in many cases, existed long before Rapid Prototyping techniques. Many of the Rapid Tooling processes have the ability to create production quality parts in the intended production material in less time and at considerably less expense than conventional hard tooling.

This report will briefly describe these RP processes along with others of interest, materials, uses and services available. As always, if additional information is needed, please contact the AMRCC.

<< Return to Top

INTENT

The main intent of Rapid Tooling is to "bridge" the gap between the product design phase and actual production of the end product, hence the name "Bridge Tooling". Many times in the product design cycle, there is a need to produce relatively small quantities of parts for market testing, environmental testing, production set-up and many other reasons. Rapid Prototyping can quickly generate one or two parts but becomes inefficient in larger quantities. Fabricating hard tooling to create parts and mold masters for a small quantity of parts with a high probability of geometry changes is not time and cost effective. There may also exist a situation where the total production run quantity of parts is in the hundreds or even a few thousand. In these situations, Rapid Tooling can be a valuable resource to provide a temporary solution until the design is proven and permanent hard tooling is completed, or in some instances, be the production tooling itself.

Rapid Tooling is usually acquired through an engineering services provider which has Rapid Prototyping capabilities. It has become difficult to evaluate the best process and compare Service Bureaus as each company has added their own twist and there are hundreds of providers to go to. Therefore, when considering the use of Rapid Tooling, the part should be reviewed by a cross-section of providers before a specific process/provider is selected.

<< Return to Top

EXPECTATIONS

There are a number of items to consider before applying Rapid Tooling as a solution. Most Rapid Tooling processes work well with difficult and complex geometries that would take a considerable amount of time to machine into hard tooling. Examples of this would be fine and "busy" details, compound curved surfaces, surfaces with changing radii and sculpted surfaces. This works best with tooling that requires only the core and cavity halves with no ejectors, inserts or multiple pulls. If the tooling requires a great deal of machining to put in additional details and tight tolerance features along with mold related details, the time and cost savings over traditional methods are reduced. The part must be right for the process and a general rule of thumb is: the simpler the part, the better the result. Other problem areas for some processes include limitations on part size, accuracy and detail with some types of geometry, unsophisticated tooling and short tool life.

Rapid Tooling does however, offer many advantages. Tooling can be created in some instances in a matter of days with potential cost savings of up to 70% over traditional methods. As stated before, complicated geometry is usually not a problem and the molds offer excellent accuracy. While many of the processes are capable of molding only 25 to a few hundred parts, there are a few that can produce many thousands.

<< Return to Top

COMMON TOOLING TRAITS

The features common among all Rapid Tooling processes begins with the creation of a CAD solid model of the part to be molded. That part is then Rapid Prototyped by one of the many systems available to create either the positive or negative master as required by the tooling process. Fits, shrinks, part sectioning and other mold considerations may need to be allowed for at this step.

In most cases, the core and cavity halves will be created as injection molding inserts. Many mold parameters and details must be determined at this time including parting lines, gates, risers, runners, ejector pins, inserts, slides, cooling lines, etc. Many processes allow some of these parameters and details to be incorporated in the initial fabrication steps, or they may be machined in later. Not all of these parameters and details are applicable to each type of mold or part.

<< Return to Top

PROCESS EXPECTATIONS

One must realize that Rapid Prototyping has limitations that are inherent to the process and parts produced should not be compared one-to-one with production parts. Of primary consideration is the speed in which the part is in-hand and ready for whatever analysis or purpose that the engineer intends. The biggest limitation to the Rapid Prototyping process is the engineers' imagination. Following are some of the more common traits that can be expected.


PROTOTYPE PARTS

  • Parts produced are within typical machining tolerances. In some cases, tolerances on fine details may be held within +/- .001.
  • There is a potential for warping or sagging, especially in high-heat environments. Certain geometries may also experience this due to cooling rates of various sections of the part during fabrication (similar to plastic injection molding issues).
  • Stratification or layering effects will be visible in many cases due to the "slicing" nature of the parts electronic description and process functions.
  • The surface finish may be course, as in the case of Selective Laser Sintering where powders are used, or rough due to the "slicing" effects. However, there are various post-processing methods to apply a finish to smooth-out the surfaces.
  • The part produced is not of the intended engineered material. Some plastic materials may be simulated in various respects but similar performance should not be expected.
  • There are also various process and material dependant issues that need to be considered.

MOLDING MASTERS FOR CASTING

  • The master part-to-negative mold -to-positive casting iterations increase tolerances. Experienced molders can reduce this tolerance build-up.

TOOLING AND METAL PARTS

  • The RP produced part or tool is built to near net shape.
  • Additional machining, polishing or other processes may be needed.
  • Materials have excellent machining properties.
  • Conformal cooling can be added and built into injection molding dies.
  • There may be quantity and use limitations.

<< Return to Top

ONGOING RESEARCH EFFORTS

As with any technology, the system manufacturers are constantly working on process improvement, cost reduction, materials and new processes. Many private research institutions as well as colleges and universities also support the Rapid Prototyping and Manufacturing industry. Listed below are some of the many areas that enjoy on-going research.

METALS

  • Direct fabrication of fully dense parts to eliminate the secondary process of infiltrating with a filler material.
  • Steel alloys, aluminum, titanium, and super alloys.
  • Blended materials in a single part.

NON-METALS

  • Increase selection of plastics and elastomers.
  • Increased part durability and versatility.
  • Develop ceramics and composites.
  • Blended materials in a single part.

CONCEPTUAL MODELERS / 3-D PRINTING

  • Increased modeler speed and accuracy.
  • Increased part durability and versatility.
  • Lower cost modelers and materials.
  • Colored materials.

ADDITIONAL EFFORTS

  • Micro-miniature parts and assemblies.
  • Inserts embedded in the part.
  • Production ready parts.

<< Return to Top

PART MODELING CONSIDERATIONS

Please note that the following examples are general guidelines that will apply to most Rapid Prototyping (RP) systems capabilities. Each RP system will have slightly different characteristics in the materials used and how the part is produced. Most RP systems are also capable of producing part geometry that cannot be machined in one piece. Therefore, it is best to design parts to the desired end product without consideration to the RP process that will be used. The goal is, after all, to produce a model of the part to be manufactured. If there is any doubt or questions, contact the RP service provider for assistance.

  • The CAD model must be a complete "watertight" solid with no open or unconnected seams. "Faked" details must be surfaced and completely connected to adjacent geometry. "Trimmed surfaces" and "knitted surfaces" also may be used to define the part. Upon testing, the part must have a closed volume.
  • Physical part size is not a problem as large parts may be divided into smaller sections which fit the RP systems build envelope. These sections are then bonded together into one part.
  • The minimum wall thickness for most RP processes is .020". Thinner walls are possible but are very dependent upon orientation within the RP modeling apparatus.
  • Part details of less than .010" are usually too small to model in most cases on Stereolithography laser systems. This is because the resolution setting (diameter of the beam) of the laser is set for modeling the entire part. If the part is very small and contains many small details, this setting may be changed to a smaller size.
  • Part details of less than .020" are usually too small to model in most cases on other laser systems. This is also due to the resolution setting and the powdered material being used.
  • Part details of less than .020" are usually too small to model in most cases by the Stratasys Fused Deposition Modeling process. This is because of the orifice size of the extruding head and method of depositing material.
  • Tapped holes must be modeled at the tap drill diameter or less and tapped after the part is prototyped. The exception would be larger thread sizes (possibly as small as .500) where the thread definition is easier for the system to model. External threads must be modeled at the major diameter. Common practice in some CAD softwares is to model the tapped hole by showing the tap drill size and thread size together. DO NOT DO THIS for a RP model as the system will see two holes in the same location and will probably model the largest. The reverse applies for external threads.
  • Round and curved features with the axis parallel with the "slicing" (stacked layers of the model) may have a stair step appearance that may have to be finished to a smooth appearance. The designer has little control over this as it is a function of orientation within the RP modeler. The RP operator will attempt to avoid this and will finish the parts to a smoother surface if needed.
  • When the part file is prepared by the designer for modeling, all text (notes, dimensions) must be removed along with all unused geometry (curves and points). The exception is engraving which must be actual features of the part.
  • Engraved or raised lettering is very difficult to model successfully and should be left off of the part geometry whenever possible. The exception is very large lettering.
  • The CAD data must have all internal errors corrected to assure a valid part description. A part may be modeled with these problems uncorrected, but the resultant part is not guaranteed to be correct.
  • Assemblies containing permanently assembled parts (pressed, welded, riveted, etc.) may be modeled in the assembled and attached positions. Smaller parts may be grouped together to be modeled as one part by joining them together with break-off tabs similar to toy models. When considering your needs, use your imagination.
  • All materials produced by RP can be machined, but care must be taken as some of these materials are somewhat brittle. Holes may be tapped, but care must be taken with the use of self-tapping screws. Parts should not be forced-fit or exposed to shock and high temperatures. The RP industry is continually making improvements to the materials it offers and this should be less of a problem in the future.
  • When ordering a part, BE SPECIFIC about the process description. Many people refer to Rapid Prototyping as "Stereolithography"!. This is just one of the many RP processes and by using that name to order model parts, you may not get the proper parts for your specific needs.

<< Return to Top

SERVICES AVAILABLE

There are many Engineering Service Providers that offer a wide range of engineering services. These companies major purpose is to aid other companies in "Rapid Product Development" with the goal of reducing the cycle time from product development through production. A wide variety of services are offered either individually or as a whole, from concept to reality. The vast majority of these providers use Stereolithography (SLA) or Selective Laser Sintering (SLS) systems as their tool of choice due to their speed and accuracy. In addition to producing prototype parts, many providers offer various extended services, including:
RAPID TOOLING PROCESSES

  • Cast Urethane - RTV Molding/Soft Tooling
  • RapidSteel - SLS Steel Tooling for Molding and Forming
  • 3D Keltool Process - Sintered Tooling
  • Direct Shell Production Casting (DSPC) - Ceramic Investment Casting Shell
  • Investment Casting - Masters and Tooling
  • SANDFORM ZR - Sand Casting Patterns
  • PROMETAL - Rapid Tooling Process

PRODUCT FINISHING PROCESSES

  • Painting and Plating
  • Color and Texture Matching
  • Artwork and Graphics
  • EMI/RFI Shield Coatings
  • Inserts and Secondary Operations
  • Vacuum Metalization

<< Return to Top

AMRCC member practitioner of this technology

The companies listed below, are willing to discuss their hands-on Rapid Prototyping and Manufacturing experiences with you. Please feel free to use the email contact feature below to notify them of your interest. You will be contacted by the company's expert with that software to address your questions at their first convenience.

Company: HON INDUSTRIES, Muscatine, IA

Rapid Prototyping equipment: One SLS 2500plus modeler by 3D Systems, Inc.

Materials/processes used:

  • DuraForm Polyamide (PA). & DuraForm Glass-Filled (GF) - next-generation nylon materials developed specifically for creating rugged engineered thermoplastic parts capable of withstanding aggressive functional testing as well as highly detailed parts.
  • DSM Somos 201 - a flexible material (elastomer) for flexible parts and gaskets.
  • CastForm PS - a material (polystyrene) suited for producing complex investment casting patterns.
  • Laser Form ST-100 - a 420 stainless steel powder-based material for producing functional metal parts and complex tooling in days.

Secondary Processes used:

  • Finishing - all levels of finish work for your SLS parts.
  • CNC - detailed machining for small and large prototype parts and molds.

For additional information from this current user, contact: HNI Corporation

Company: Rockwell Collins, Inc. Cedar Rapids, IA

Rapid Prototyping equipment: Previous in-house operations used the Stratasys FDM technology. Currently use external service providers.

Materials/process experience:

  • Stratasys Fused Deposition Modeling (FDM).
  • 3D Systems Stereolithography (SLA).
  • 3D Systems Selective Laser Sintering (SLS) – including metals.
  • Knowledge of many other RP processes.
  • Soft tooling/Urethane casting.
  • Part finishing to presentation standards.

For additional information from this current user, contact: Rockwell Collins, Inc.

<< Return to Top

Click Service Providers to search Iowa companies by solution

Search Useful Links to find manufacturers and suppliers of this technology.

Providing leadership in advanced manufacturing and engineering to Iowa companies
Powered by SiteViz